Why We Made This – Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of color to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one. 

Why You Want It – Because colors make you happy. Because what we wrote above about symmetry and balance makes sense to you. Because it’s another high-quality component you can use to show your bike how much you love it. Because it just looks great. 

Specifications

• Aluminum collar with stainless steel bolt, washer, and barrel nut
• Available in 10 colors to match King components
• Available in four sizes: 30.0, 31.8, 34.9, 36.4 
• Made in the USA
• Lifetime Warranty

Installation

• Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
• We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
• Maximum Torque is 6nm.
• Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
• The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.
• Find more tech info here.
• Seatpost Collar Sizing Guide